# Connection not private when selecting TechCommunities under Softwareag.com Resources **URL:** \ **Category:** Forum\ **Tags:** Tech Community\ **Created:** [November 3, 2020, 4:48am UTC](https://techcommunity.softwareag.com/t/connection-not-private-when-selecting-techcommunities-under-softwareag-com-resources/234932 "2020-11-03T04:48:05Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Mark\_Finnern](https://sea1.discourse-cdn.com/techcommunity/user_avatar/techcommunity.softwareag.com/mark_finnern/32/20066_2.png) [@Mark\_Finnern](https://techcommunity.softwareag.com/u/Mark_Finnern)\ **Post date:** [November 3, 2020, 4:48am UTC](https://techcommunity.softwareag.com/t/connection-not-private-when-selecting-techcommunities-under-softwareag-com-resources/234932/1 "2020-11-03T04:48:05Z")
![Screen Shot 2020-11-02 at 8.35.00 PM](https://global.discourse-cdn.com/techcommunity/original/2X/7/7d6a24c093ec82f4bde72921287a2f38b0578f9c.png) When I select Communities under the Resources Tab on the main Software AG webpage, and then “[Go To TechCommunities](https://techcommunity.softwareag.com/)” on that page. ![Screen Shot 2020-11-02 at 8.38.46 PM](https://global.discourse-cdn.com/techcommunity/original/2X/d/d9755784bd9f8c3fbcacc94aafd0e33eac1a4a98.png) I get the following error message: Your connection is not private. ![Screen Shot 2020-11-02 at 8.39.17 PM](https://global.discourse-cdn.com/techcommunity/original/2X/f/f974b34c51f9c81de10d3bba44d9197b0858c190.png) I think it is the missing “s” after http in the URL: [http://techcommunity.softwareag.com/](http://techcommunity.softwareag.com/) which I hope isn’t a leftover from the ransomware attack. Adding that “s” isn’t enough, I tried. Hope this helps! ---
**Author:** ![Holger\_von\_Thomsen](https://sea1.discourse-cdn.com/techcommunity/user_avatar/techcommunity.softwareag.com/holger_von_thomsen/32/178_2.png) [@Holger\_von\_Thomsen](https://techcommunity.softwareag.com/u/Holger_von_Thomsen)\ **Post date:** [November 3, 2020, 6:08pm UTC](https://techcommunity.softwareag.com/t/connection-not-private-when-selecting-techcommunities-under-softwareag-com-resources/234932/2 "2020-11-03T18:08:28Z")
Hi, the techcommunity is also affected by the attack. I just tried this and was redirected to the current main webpage. The certificate mismatch is related to this redirection which seems to not work correctly in private mode (like in your case). Regards, Holger ---
**Author:** ![toni.petrov](https://sea1.discourse-cdn.com/techcommunity/user_avatar/techcommunity.softwareag.com/toni.petrov/32/23700_2.png) [@toni.petrov](https://techcommunity.softwareag.com/u/toni.petrov)\ **Post date:** [November 9, 2020, 9:03am UTC](https://techcommunity.softwareag.com/t/connection-not-private-when-selecting-techcommunities-under-softwareag-com-resources/234932/3 "2020-11-09T09:03:28Z")
Thanks Mark, We’ve updated the link now. ---
**Author:** ![Mark\_Finnern](https://sea1.discourse-cdn.com/techcommunity/user_avatar/techcommunity.softwareag.com/mark_finnern/32/20066_2.png) [@Mark\_Finnern](https://techcommunity.softwareag.com/u/Mark_Finnern)\ **Post date:** [November 10, 2020, 5:29pm UTC](https://techcommunity.softwareag.com/t/connection-not-private-when-selecting-techcommunities-under-softwareag-com-resources/234932/4 "2020-11-10T17:29:36Z")
Thanks for the update. It is a bit unfortunate, that I can’t edit my original post, as it will continue to have the old link in there, which still gets the warning page. Here is the new and good link URL: [https://techcommunity.softwareag.com/](https://techcommunity.softwareag.com/) 🙂 ---
**Author:** ![Mark\_Finnern](https://sea1.discourse-cdn.com/techcommunity/user_avatar/techcommunity.softwareag.com/mark_finnern/32/20066_2.png) [@Mark\_Finnern](https://techcommunity.softwareag.com/u/Mark_Finnern)\ **Post date:** [November 12, 2020, 4:35am UTC](https://techcommunity.softwareag.com/t/connection-not-private-when-selecting-techcommunities-under-softwareag-com-resources/234932/5 "2020-11-12T04:35:28Z")
Hi Toni, I found another one, unfortunately. When you select the “free trial” in the header of this page: [https://resources.softwareag.com/services/2019-8-bro-education-en-global-education-services-course-catalog](https://resources.softwareag.com/services/2019-8-bro-education-en-global-education-services-course-catalog) ![Screen Shot 2020-11-11 at 8.32.20 PM](https://global.discourse-cdn.com/techcommunity/original/2X/e/e3bf9548cb78ca26ebd2ba5ad978cc5890e30882.jpeg) You get the not secure page again: ![Screen Shot 2020-11-11 at 8.34.11 PM](https://global.discourse-cdn.com/techcommunity/original/2X/6/66fcbf059cdbd043a8b4ce2c492966dad30546d9.png) [https://www.softwareag.com/corporate/products/downloads/free\_downloads/default.html](https://www.softwareag.com/corporate/products/downloads/free_downloads/default.html) All the best, Mark. ---
**Author:** ![Mark\_Finnern](https://sea1.discourse-cdn.com/techcommunity/user_avatar/techcommunity.softwareag.com/mark_finnern/32/20066_2.png) [@Mark\_Finnern](https://techcommunity.softwareag.com/u/Mark_Finnern)\ **Post date:** [November 12, 2020, 4:41am UTC](https://techcommunity.softwareag.com/t/connection-not-private-when-selecting-techcommunities-under-softwareag-com-resources/234932/6 "2020-11-12T04:41:14Z")
One more on this page: [Ecosystem](https://www.softwareag.cloud/site/ecosystem.html#/) Getting Started button on this tile leads to the not secure page: ![Screen Shot 2020-11-11 at 8.39.56 PM](https://global.discourse-cdn.com/techcommunity/original/2X/a/a81237deeb659570334fac6216318d8fcca856d7.jpeg) ---
**Author:** ![system](https://global.discourse-cdn.com/techcommunity/original/3X/c/d/cd19967bb605d28a72d77eb83a1cae22f3df2eb8.svg) [@system](https://techcommunity.softwareag.com/u/system)\ **Post date:** [April 2, 2021, 3:45pm UTC](https://techcommunity.softwareag.com/t/connection-not-private-when-selecting-techcommunities-under-softwareag-com-resources/234932/7 "2021-04-02T15:45:21Z")