# EDIINT AS2 using Cyclone

**URL:** <https://techcommunity.softwareag.com/t/ediint-as2-using-cyclone/108243>\
**Category:** Forum\
**Tags:** EDI\
**Created:** [October 4, 2002, 3:41am UTC](https://techcommunity.softwareag.com/t/ediint-as2-using-cyclone/108243 "2002-10-04T03:41:30Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Guest](https://sea1.discourse-cdn.com/techcommunity/user_avatar/techcommunity.softwareag.com/guest/32/75_2.png) [@Guest](https://techcommunity.softwareag.com/u/Guest)\
**Post date:** [October 4, 2002, 3:41am UTC](https://techcommunity.softwareag.com/t/ediint-as2-using-cyclone/108243/1 "2002-10-04T03:41:30Z")

</div>

Hi,  
Anybody out there integrated webMethods EDIINT AS2 solution with Cyclone EDIINT AS2 product?  
I have some specific content-type issues to discuss.

---

<div class="post-metadata">

**Author:** ![Guest](https://sea1.discourse-cdn.com/techcommunity/user_avatar/techcommunity.softwareag.com/guest/32/75_2.png) [@Guest](https://techcommunity.softwareag.com/u/Guest)\
**Post date:** [October 4, 2002, 8:00am UTC](https://techcommunity.softwareag.com/t/ediint-as2-using-cyclone/108243/2 "2002-10-04T08:00:59Z")

</div>

Hi PU,  
Our VAN provider uses Cyclone Commerce’s AS2 adapter to connect to our webMethods EDIINT AS2 adapter. We customized the webMethods 4.5 version of the adapter and that is what they connect to. We have document transactions going inbound and outbound with them. We may be able to help out…

-Ben

---

<div class="post-metadata">

**Author:** ![Guest](https://sea1.discourse-cdn.com/techcommunity/user_avatar/techcommunity.softwareag.com/guest/32/75_2.png) [@Guest](https://techcommunity.softwareag.com/u/Guest)\
**Post date:** [October 4, 2002, 7:38pm UTC](https://techcommunity.softwareag.com/t/ediint-as2-using-cyclone/108243/3 "2002-10-04T19:38:52Z")

</div>

Hi Ben,  
We are using EDIINT 4.6 with TN 4.6. I am not familiar much with Cyclone product. And also I don’t have access to it. One of our partner is using it.  
We try to use cutom Content-Types and other end don’t know if it is supported or not. Can we use custom content-types with Cyclone AS2 client at all? If yes, How and where, so that I can talk to them little more intelligently.  
Also when I send them the document with “application/xml” and it is going to other/unknown documents folder. I am not sure why? Is there any other customization required on webMethods end or Cyclone end?

---

<div class="post-metadata">

**Author:** ![Guest](https://sea1.discourse-cdn.com/techcommunity/user_avatar/techcommunity.softwareag.com/guest/32/75_2.png) [@Guest](https://techcommunity.softwareag.com/u/Guest)\
**Post date:** [October 7, 2002, 9:58pm UTC](https://techcommunity.softwareag.com/t/ediint-as2-using-cyclone/108243/4 "2002-10-07T21:58:25Z")

</div>

PU,  
I am not that familiar with the Cyclone products either, and it sounds like most of your issues are centered around the lack of visibility into and around the Cyclone product. I will forward these questions to our VAN provider and see if they have any insight. From my experience, I had to speak with Cyclone support directly and actually bolted the Cyclone support environment into ours to resolve our issues, because the tech person at our VAN had inherited the AS2 aspect and wasn’t that familiar with it, thus Cyclone support was able to support their customer a little easier. At any rate, I was able to get a support .pdf of the Cyclone Commerce Interchange product and will send it to you, it may have some information around content types. However, I’m not sure which Cyclone product/version(s) you may be dealing with.

---

<div class="post-metadata">

**Author:** ![alan.raleigh.11715](https://avatars.discourse-cdn.com/v4/letter/a/e47c2d/32.png) [@alan.raleigh.11715](https://techcommunity.softwareag.com/u/alan.raleigh.11715)\
**Post date:** [July 9, 2003, 1:17am UTC](https://techcommunity.softwareag.com/t/ediint-as2-using-cyclone/108243/5 "2003-07-09T01:17:51Z")

</div>

We are just starting to work with a partner with Cyclone and we are using Wm 4.6. Have you been successful?  
Here is one tip we found:  
Apparently Cyclone can’t handle a url with a “/” at the end. If you send it an EDIINT AS2 message you will get a Server Error: Service unavailable (http 503) in the Activity log for the Transaction. Taking off the / at the end of the Location setting in the Profile enabled them to receive the message.

---

<div class="post-metadata">

**Author:** ![Guest](https://sea1.discourse-cdn.com/techcommunity/user_avatar/techcommunity.softwareag.com/guest/32/75_2.png) [@Guest](https://techcommunity.softwareag.com/u/Guest)\
**Post date:** [December 17, 2003, 3:02am UTC](https://techcommunity.softwareag.com/t/ediint-as2-using-cyclone/108243/6 "2003-12-17T03:02:48Z")

</div>

I am also having problems integrating the WM EDIINT AS2 solution with Cyclone. Was there any closure on this topic? I see the mentioning of a .pdf. How can I get a copy?

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/techcommunity/original/3X/c/d/cd19967bb605d28a72d77eb83a1cae22f3df2eb8.svg) [@system](https://techcommunity.softwareag.com/u/system)\
**Post date:** [April 2, 2021, 3:05pm UTC](https://techcommunity.softwareag.com/t/ediint-as2-using-cyclone/108243/7 "2021-04-02T15:05:07Z")

</div>


