# Installation/Extraction Error

**URL:** <https://techcommunity.softwareag.com/t/installation-extraction-error/95135>\
**Category:** Forum\
**Tags:** Adabas-Natural, Natural, Natural-Add-on-Products, Natural-Engineer, Natural-Other-Addons\
**Created:** [October 26, 2010, 12:31pm UTC](https://techcommunity.softwareag.com/t/installation-extraction-error/95135 "2010-10-26T12:31:33Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![YUBEN1](https://avatars.discourse-cdn.com/v4/letter/y/eada6e/32.png) [@YUBEN1](https://techcommunity.softwareag.com/u/YUBEN1)\
**Post date:** [October 26, 2010, 12:31pm UTC](https://techcommunity.softwareag.com/t/installation-extraction-error/95135/1 "2010-10-26T12:31:33Z")

</div>

We are attempting to run an extract on a Mainframe Installation of Natural Engineer 6.2.1.5 but get an error :

- CEEEXT-N Cannot read control record for BRACWEB  
CEE processor response code= 9

This error occurs both in batch and online to batch. Has anyone come across this error before, and if so how did you resolve it? Thanks in advance.

---

<div class="post-metadata">

**Author:** ![Brian\_James](https://avatars.discourse-cdn.com/v4/letter/b/9e8a1a/32.png) [@Brian\_James](https://techcommunity.softwareag.com/u/Brian_James)\
**Post date:** [October 26, 2010, 12:37pm UTC](https://techcommunity.softwareag.com/t/installation-extraction-error/95135/2 "2010-10-26T12:37:00Z")

</div>

Sounds like the LFILE setting in Batch does not match the LFILE setting when you created the application.  
Check that LFILE 96 is pointing to the correct NEE repository file in the Batch settings.

---

<div class="post-metadata">

**Author:** ![YUBEN1](https://avatars.discourse-cdn.com/v4/letter/y/eada6e/32.png) [@YUBEN1](https://techcommunity.softwareag.com/u/YUBEN1)\
**Post date:** [October 26, 2010, 1:52pm UTC](https://techcommunity.softwareag.com/t/installation-extraction-error/95135/3 "2010-10-26T13:52:09Z")

</div>

Thanks for your response.

We now get this error:

- NEXT NATEXT-P 
- \*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\* 
- \* 
- N A T U R A L E N G I N E E R 6 . 2 . 1 . 5 \* 
- \* 
- \*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\* 
- \*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\* 
- \* 
- N A T U R A L E N G I N E E R 6 . 2 . 1 . 5 \* 
- \* 
- \*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*  
CEEEXT-N 4910 NAT0954 Abnormal termination S0C1 during program execution.  
NEXT FIN  
NAT9978 Error occurred during execution/compilation. 

Any ideas? Thanks.

---

<div class="post-metadata">

**Author:** ![Brian\_James](https://avatars.discourse-cdn.com/v4/letter/b/9e8a1a/32.png) [@Brian\_James](https://techcommunity.softwareag.com/u/Brian_James)\
**Post date:** [October 26, 2010, 2:05pm UTC](https://techcommunity.softwareag.com/t/installation-extraction-error/95135/4 "2010-10-26T14:05:39Z")

</div>

This looks like it needs to go to support - but check the setting of the DATSIZE. Should be set to 512  
Other than that support will ask for the .EEX file (work file 4) and all messages from the JCL job submitted.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/techcommunity/original/3X/c/d/cd19967bb605d28a72d77eb83a1cae22f3df2eb8.svg) [@system](https://techcommunity.softwareag.com/u/system)\
**Post date:** [April 2, 2021, 2:59pm UTC](https://techcommunity.softwareag.com/t/installation-extraction-error/95135/5 "2021-04-02T14:59:17Z")

</div>