# Invalid EDIINT message, ignored. **URL:** \ **Category:** Forum\ **Tags:** EDI\ **Created:** [March 3, 2015, 10:59pm UTC](https://techcommunity.softwareag.com/t/invalid-ediint-message-ignored/180867 "2015-03-03T22:59:08Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![I\_D1](https://avatars.discourse-cdn.com/v4/letter/i/ecd19e/32.png) [@I\_D1](https://techcommunity.softwareag.com/u/I_D1)\ **Post date:** [March 3, 2015, 10:59pm UTC](https://techcommunity.softwareag.com/t/invalid-ediint-message-ignored/180867/1 "2015-03-03T22:59:08Z")
We currently have an 8.2 version running and have stood up a 9.7 version as part of our upgrade. All of our packages have been migrated along with the configurations, etc. In 9.7 we are able to send EDI via EDIINT and receive MDNs back with no problems. However, when a partner tries to send back a 997, or any other transaction, all that we see in the TN activity log is the message “Invalid EDIINT message, ignored.” No EDIINT message is created, just that error. We need to get this resolved as soon as possible since we have lined up business resources for testing. Any guidance is appreciated. ![2015-03-03 15_50_43-My webMethods_ Activity Log.png](https://global.discourse-cdn.com/techcommunity/original/2X/8/87a683e291ad7189beb6e41a19d7724fee257b00.png) ---
**Author:** ![Tong\_Wang](https://sea1.discourse-cdn.com/techcommunity/user_avatar/techcommunity.softwareag.com/tong_wang/32/410_2.png) [@Tong\_Wang](https://techcommunity.softwareag.com/u/Tong_Wang)\ **Post date:** [March 4, 2015, 5:44pm UTC](https://techcommunity.softwareag.com/t/invalid-ediint-message-ignored/180867/2 "2015-03-04T17:44:55Z")
Can you provide the content of that AS2 message? Does it look like a valid AS2 message? you can compare it with the other message that you received (MDN) ---
**Author:** ![Deepika\_Adhi](https://avatars.discourse-cdn.com/v4/letter/d/85f322/32.png) [@Deepika\_Adhi](https://techcommunity.softwareag.com/u/Deepika_Adhi)\ **Post date:** [March 16, 2015, 11:57am UTC](https://techcommunity.softwareag.com/t/invalid-ediint-message-ignored/180867/3 "2015-03-16T11:57:00Z")
I can see this type of error in flow : wm.EDIINT:receive, and it occurs if the protocol is other than ftp, http, smtp. Please check the protocol. ---
**Author:** ![Pramod1](https://avatars.discourse-cdn.com/v4/letter/p/82dd89/32.png) [@Pramod1](https://techcommunity.softwareag.com/u/Pramod1)\ **Post date:** [April 17, 2015, 7:36am UTC](https://techcommunity.softwareag.com/t/invalid-ediint-message-ignored/180867/4 "2015-04-17T07:36:59Z")
Hi ID, We too did upgrade from 7.1.2 to 9.7, and see EDIINT messages being ignored. Can you please let me know if you did manage to find a resolution? Thanks, Pramod ---
**Author:** ![rmg](https://avatars.discourse-cdn.com/v4/letter/r/278dde/32.png) [@rmg](https://techcommunity.softwareag.com/u/rmg)\ **Post date:** [April 17, 2015, 5:46pm UTC](https://techcommunity.softwareag.com/t/invalid-ediint-message-ignored/180867/5 "2015-04-17T17:46:56Z")
Pramod, I would say please open a ticket with SAG support as it sounds its not normal behaviour with the EDIINT module and they can assist you faster resolution! HTH, RMG ---
**Author:** ![I\_D1](https://avatars.discourse-cdn.com/v4/letter/i/ecd19e/32.png) [@I\_D1](https://techcommunity.softwareag.com/u/I_D1)\ **Post date:** [April 17, 2015, 8:17pm UTC](https://techcommunity.softwareag.com/t/invalid-ediint-message-ignored/180867/6 "2015-04-17T20:17:08Z")
We had to set the property wm.EDIINT.receiverURLs=/invoke/wm.EDIINT/receive in MWS. Go to Applications/Administration/Integration/B2B Settings and set that add the setting if it is not there or change it to the service that you are invoking for EDIINT receive. The property needs to go in the EDIINT Module Configuration Properties. ID ---
**Author:** ![Pramod1](https://avatars.discourse-cdn.com/v4/letter/p/82dd89/32.png) [@Pramod1](https://techcommunity.softwareag.com/u/Pramod1)\ **Post date:** [April 20, 2015, 4:23am UTC](https://techcommunity.softwareag.com/t/invalid-ediint-message-ignored/180867/7 "2015-04-20T04:23:03Z")
Hi RMG/ID, Thanks for your reply. Yes, appending service’s FQN to “wm.EDIINT.receiverURLs” property in IS\_HOME/packages/WmEDIINT/config/properties.cnf did the trick. wm.EDIINT.receiverURLs=/invoke/wm.EDIINT/receive,/invoke/./ Apparently this property was introduced with EDIINT Module 8.2.2 via EDI\_8.2.1\_WmEDIINT\_Fix1, below description is from the readme: ## [i] EEO-2849 In webMethods Module 8.2 SP1 for EDIINT, the receive functionality does not work as expected. In webMethods Module for EDIINT,the receive functionality does not work as expected when the user changes, clones, or uses a remote alias for the wm.EDIINT:receive service. This issue is resolved. When the user uses a URL other than wm.EDIINT:receive, a new property, wm.EDIINT.receiverURLs, must be configured. The new URL(s) must be appended to the value of this property. ## New property reference: wm.EDIINT.receiverURLs A comma-separated list of URLs. The default is /invoke/wm.EDIINT/receive. Note: The new URLs must be appended to the default URL, for example, wm.EDIINT.receiverURLs=/invoke/wm.EDIINT/receive, /invoke/EDIINT\_AS2/clone\_Service [/i] Cheers, Pramod ---
**Author:** ![rmg](https://avatars.discourse-cdn.com/v4/letter/r/278dde/32.png) [@rmg](https://techcommunity.softwareag.com/u/rmg)\ **Post date:** [April 20, 2015, 6:02pm UTC](https://techcommunity.softwareag.com/t/invalid-ediint-message-ignored/180867/8 "2015-04-20T18:02:32Z")
Yes that is the way to go…and thanks for the update and results 😃 And note you can update the config file via MWS EDI screens as well. HTH, RMG ---
**Author:** ![system](https://global.discourse-cdn.com/techcommunity/original/3X/c/d/cd19967bb605d28a72d77eb83a1cae22f3df2eb8.svg) [@system](https://techcommunity.softwareag.com/u/system)\ **Post date:** [April 2, 2021, 3:32pm UTC](https://techcommunity.softwareag.com/t/invalid-ediint-message-ignored/180867/9 "2021-04-02T15:32:59Z")