# Nat823: RPC servers and Global Buffer Pool?

**URL:** <https://techcommunity.softwareag.com/t/nat823-rpc-servers-and-global-buffer-pool/172664>\
**Category:** Forum\
**Tags:** Adabas-Natural, Natural, Natural-on-Mainframes\
**Created:** [September 20, 2013, 8:29pm UTC](https://techcommunity.softwareag.com/t/nat823-rpc-servers-and-global-buffer-pool/172664 "2013-09-20T20:29:53Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![STomsko](https://avatars.discourse-cdn.com/v4/letter/s/848f3c/32.png) [@STomsko](https://techcommunity.softwareag.com/u/STomsko)\
**Post date:** [September 20, 2013, 8:29pm UTC](https://techcommunity.softwareag.com/t/nat823-rpc-servers-and-global-buffer-pool/172664/1 "2013-09-20T20:29:53Z")

</div>

I just upgraded from NAT427 to NAT823 (z/OS). New v82 GBP is working fine for everything EXCEPT our Natural RPC Servers – they can’t find the GBP. Very strange…

Natural error NAT1074 occurred during Natural initialization. Substitutions for  
placeholders in message text for NAT1074: NATURAL,NATBPN1  
:::::::::::::::  
NAT9990 Natural initialization failed.

We took out the BPNAME=NATBPN1 and they come up normally – but we want to use the GBP. The 1074 error explicitly says: “If the buffer pool could not be found because the Natural subsystem does not exist, the name of the Natural subsystem is appended to the name of the global buffer pool, separated by a slash (/).”

The subsystem name is ‘NATL’, and it does exist, so I assume Natural is picking up the name from the NATBATCH natparms and verifying that the SUBSID exists, otherwise ‘/NATL’ would be in the error message. Anyone have any thoughts about this?

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/techcommunity/original/3X/c/d/cd19967bb605d28a72d77eb83a1cae22f3df2eb8.svg) [@system](https://techcommunity.softwareag.com/u/system)\
**Post date:** [September 20, 2013, 8:41pm UTC](https://techcommunity.softwareag.com/t/nat823-rpc-servers-and-global-buffer-pool/172664/2 "2013-09-20T20:41:23Z")

</div>

Is there a SUBSID=NATL in your RPC server NATPARMs ?

You can try adding a bogus SUBSID to your CMPRMIN and see if the message changes.

---

<div class="post-metadata">

**Author:** ![STomsko](https://avatars.discourse-cdn.com/v4/letter/s/848f3c/32.png) [@STomsko](https://techcommunity.softwareag.com/u/STomsko)\
**Post date:** [September 20, 2013, 8:49pm UTC](https://techcommunity.softwareag.com/t/nat823-rpc-servers-and-global-buffer-pool/172664/3 "2013-09-20T20:49:51Z")

</div>

Wolfgang, SUBSID=NATL is in all of our NATPARM modules for batch (NATBATCH), TSO (NATTSO) and CICS front-ends; NATBATCH is the front end being executed by the RPC Server tasks. NATURAL sessions under TSO and CICS connect to the NATBPN1 buffer pool using the SUBSID – can’t figure out why NATBATCH can’t. I will try adding the SUBSID parm to CMPRMIN to see if anything changes.

---

<div class="post-metadata">

**Author:** ![STomsko](https://avatars.discourse-cdn.com/v4/letter/s/848f3c/32.png) [@STomsko](https://techcommunity.softwareag.com/u/STomsko)\
**Post date:** [September 23, 2013, 9:48pm UTC](https://techcommunity.softwareag.com/t/nat823-rpc-servers-and-global-buffer-pool/172664/4 "2013-09-23T21:48:15Z")

</div>

Adding the SUBSID parm to the input parms to the batch RPC server did fix this issue. I’d still like to know why, though, since the SUBSID parm is included in the NATPARMs for the NATURAL batch front end. Thanks for the suggestion.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/techcommunity/original/3X/c/d/cd19967bb605d28a72d77eb83a1cae22f3df2eb8.svg) [@system](https://techcommunity.softwareag.com/u/system)\
**Post date:** [September 24, 2013, 8:46am UTC](https://techcommunity.softwareag.com/t/nat823-rpc-servers-and-global-buffer-pool/172664/5 "2013-09-24T08:46:16Z")

</div>

Steve,

pure speculation, but any chance SUBSID has been added to your NATPARM  
but it never actually got assembled / linked to the frontend as you assume ?

Browse the load module and you should see it there (or not).

Cheers,

&nbsp;&nbsp;&nbsp;Wolfgang

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/techcommunity/original/3X/c/d/cd19967bb605d28a72d77eb83a1cae22f3df2eb8.svg) [@system](https://techcommunity.softwareag.com/u/system)\
**Post date:** [April 2, 2021, 3:29pm UTC](https://techcommunity.softwareag.com/t/nat823-rpc-servers-and-global-buffer-pool/172664/6 "2021-04-02T15:29:29Z")

</div>


