# Natural UPgrade to 3.1.6 : Natural RPC server could not strt

**URL:** <https://techcommunity.softwareag.com/t/natural-upgrade-to-3-1-6-natural-rpc-server-could-not-strt/59192>\
**Category:** Forum\
**Tags:** Mainframe-Integration, EntireX\
**Created:** [March 18, 2005, 9:09pm UTC](https://techcommunity.softwareag.com/t/natural-upgrade-to-3-1-6-natural-rpc-server-could-not-strt/59192 "2005-03-18T21:09:42Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![mustafa\_tavsiz](https://avatars.discourse-cdn.com/v4/letter/m/ecc23a/32.png) [@mustafa\_tavsiz](https://techcommunity.softwareag.com/u/mustafa_tavsiz)\
**Post date:** [March 18, 2005, 9:09pm UTC](https://techcommunity.softwareag.com/t/natural-upgrade-to-3-1-6-natural-rpc-server-could-not-strt/59192/1 "2005-03-18T21:09:42Z")

</div>

Hello to all ,

Enviroment :  
Natural : 3.1.6  
Entirex : 6.1.1  
OS390 : 2.10  
We try to upgrade Natural 3.1.6 from 2.3.4 on the test enviroment.When we try to start RPC server ,which we can start it on 2.3.4,we cannot start it.We get below messages and task goes down.  
Any recommandations will be very helpfull .

NAT9995 NATURAL SESSION TERMINATED NORMALLY  
M \*\*\* Init a NAT316 RPC server on MVS/ESA in lib SYSRPC at 17:27:07  
M \*\*\* Startup parameters for transport:  
M \*\*\* Server = SRV7  
M \*\*\* Node = ETB148  
M \*\*\* UserID = \*NSC  
M \*\*\* Natural RPC version: 5.1.1 - update level 0  
M \*\*\* Highest supported protocol version: 1130  
M EntireX Broker Stub Version=6.1.1, Patch Level=30, Highest API Supported=6  
M \*\*\* LOGON to Broker ETB148 failed.  
M 00200379 API: Inconsistent Security Installation  
MC \*\*\* Initialization aborted at 17:27:08

//ETBSRV4 PROC  
//SAGTOK3 EXEC PGM=SAGTOKEN,  
// PARM=(‘DELETE LOCAL,STUBLOG=’)  
//STEPLIB DD DSN=SAGLIBT.EXX611.LOAD,DISP=SHR  
//\*  
//STASRV4 EXEC PGM=NATBATCH,REGION=0M  
//STEPLIB DD DSN=SAGTEST.SMALOAD,DISP=SHR  
// DD DSN=SAGLIBT.SMALOAD,DISP=SHR  
// DD DSN=SAGLIBT.NTASK.LOAD,DISP=SHR  
// DD DSN=SAGLIBT.EXS611.LOAD,DISP=SHR  
// DD DSN=SAGTEST.ADA713.LOAD,DISP=SHR  
// DD DSN=SAGLIBT.EXX611.LOAD,DISP=SHR  
// DD DSN=SAGTEST.NAT316.LOAD,DISP=SHR  
//SYSTCPD DD DSN=HTPLEX.TCPIP.PARMS(DATAHT30),DISP=SHR  
//SYSUDUMP DD SYSOUT=X  
//SYSPRINT DD SYSOUT=X  
//CMPRINT DD SYSOUT=X  
//CMPRINT1 DD SYSOUT=X  
//CMPRINT2 DD SYSOUT=X  
//CMPRINT3 DD SYSOUT=X  
//CMPRINT4 DD SYSOUT=X  
//CMPRT10 DD SYSOUT=X  
//CMPRT11 DD SYSOUT=X  
//CMPRT12 DD SYSOUT=X  
//CMPRT13 DD SYSOUT=X  
//CMPRT14 DD SYSOUT=X  
//TRACE1 DD SYSOUT=X  
//TRACE2 DD SYSOUT=X  
//TRACE3 DD SYSOUT=X  
//TRACE4 DD SYSOUT=X  
//TRACE5 DD SYSOUT=X  
//STUBLOG DD SYSOUT=X  
//SYSOUT DD SYSOUT=X  
//DDCARD DD DSN=SAGLIBT.EXX611.JOBS(ADACARD4),DISP=SHR  
//\*  
//CMPRMIN DD DSN=HTPLEX.ADABAS.PROCLIB(PARM4),DISP=SHR  
//\* CMPRMIN DD \*  
//\*

\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*PARM4 \*\*\*\*\*\*\*\*\*\*\*\*\*\*  
INTENS=1,BPID=0,DSIZE=32,IM=D,MADIO=0,MAXCL=0,DBID=2,  
ETID=’ ‘,PRINT=((10),AM=STD)  
RPC=(SERVER=ON,MAXBUFF=20,SRVNAME=SRV7,TRACE=2,RPCSIZE=32,  
SRVNODE=ETB148,LOGONRQ=OFF,ACIVERS=4,SRVUSER=’\*NSC’),  
RCA=(BROKER),RCALIAS=(BROKER,BKIMBTSO)  
STACK=(LOGON SYSRPC,ETBSRV1,ETBSRV22)

REgards

---

<div class="post-metadata">

**Author:** ![Douglas\_Kelly](https://sea1.discourse-cdn.com/techcommunity/user_avatar/techcommunity.softwareag.com/douglas_kelly/32/102_2.png) [@Douglas\_Kelly](https://techcommunity.softwareag.com/u/Douglas_Kelly)\
**Post date:** [March 20, 2005, 3:45am UTC](https://techcommunity.softwareag.com/t/natural-upgrade-to-3-1-6-natural-rpc-server-could-not-strt/59192/2 "2005-03-20T03:45:08Z")

</div>

The error indicates that either you have a secured client and an unsecured Broker, or, more likely, a secured broker (using EntireX Security) and a client Broker stub without the security option installed.

From the installation documentation:

Applications using BKIMBTSO  
Run job SAGJ108 in order to create load module SECUEXIT. This module must be made available in the steplib of the application. Member SAGJ108 contains INCLUDEs for the following additional modules: NA2PSUEX Broker security stub module  
NA2PETS Broker security stub logic  
NA2PPRM System parameter module

Ensure the system parameter module (i.e., NA2PPRM), created using job SAGJ010, is the same as the one used by the EntireX Security Started Task component.

---

<div class="post-metadata">

**Author:** ![mustafa\_tavsiz](https://avatars.discourse-cdn.com/v4/letter/m/ecc23a/32.png) [@mustafa\_tavsiz](https://techcommunity.softwareag.com/u/mustafa_tavsiz)\
**Post date:** [March 21, 2005, 5:53pm UTC](https://techcommunity.softwareag.com/t/natural-upgrade-to-3-1-6-natural-rpc-server-could-not-strt/59192/3 "2005-03-21T17:53:20Z")

</div>

We created load module SECUEXIT by using below parameters and JCl to link edit

NA2PARM parameter member is below.

NA2PPRM GWDBID=145, DBID OF SAF GATEWAY X  
GWSIZE=32, SAF GATEWAY BUFFER SIZE X  
GWMSGL=1, SAG GATEWAY MESSAGE LEVEL X  
GWSTYP=1, TYPE OF SECURITY REPOSITORY X  
BKPRIV=0, BROKER - NO ENCRYPTION OF MESSAGES X  
BKREG=N, BROKER - REGISTER AUTHORIZATION X  
BKNCU=2, BROKER - NUMBER CHECKS BUFFERED / USER X  
BKUNI=Y, X  
BKICLS=Y, X  
BKINME=N, X  
BKISER=N, X  
BKTUID=Y, X  
BKICON=Y BROKER - NO TCP/IP ADDRESS CHECK  
END

==========================================

//USEREXC JOB SMA,MSGLEVEL=1,  
// CLASS=T,MSGCLASS=X,REGION=4M  
//LKD7657 EXEC PGM=IEWL,  
// PARM=(‘RENT,REUS,XREF,LET,LIST,NCAL’,  
// ‘SIZE=(1024K,256K)’),  
// COND=(4,LT)  
//SYSLMOD DD DSN=SAGLIBT.EXS611.LOAD,  
// DISP=SHR  
//SYSLIN DD DDNAME=SYSIN  
//SYSUT1 DD UNIT=3390,SPACE=(1700,(500,100))  
//SYSPRINT DD SYSOUT=\*,  
// DCB=(RECFM=FB,LRECL=121,BLKSIZE=1210)  
//EXSLIB DD DSN=SAGLIBT.EXS611.LOAD,DISP=SHR  
//SMALIB DD DSN=SAGLIBT.SMALOAD,DISP=SHR  
//SYSIN DD \*  
INCLUDE EXSLIB(NA2PSUEX) ENTIREX SECURITY STUB MODULE  
INCLUDE EXSLIB(NA2PETS) ENTIREX SECURITY STUB LOGIC  
INCLUDE SMALIB(NA2PPRM) ENTIREX SECURITY PARAMETERS  
NAME SECUEXIT(R)

We used below Broker Atribute parameters  
\*\* ENTIRE Broker attributes \*\*\*\*\*\*\*\*\*\*

DEFAULTS = BROKER  
AUTOLOGON = YES  
BROKER-ID = ETB148:3001  
CLIENT-NONACT = 15M  
CONV-DEFAULT = 1000  
LONG-BUFFER-DEFAULT = 400  
NUM-CLIENT = 500  
NUM-CONVERSATION = 5000  
NUM-LONG-BUFFER = 4000  
NUM-SERVER = 100  
NUM-SERVICE = 100  
NUM-SHORT-BUFFER = 5000  
NUM-WORKER = 10  
SECURITY = YES  
SERVICE-UPDATES = YES

And finally ,we use below startu proc. for ETBSEC .

//ETBSEC PROC  
//EXSGATE EXEC PGM=SAFMPM,REGION=0M  
//STEPLIB DD DISP=SHR,DSN=SAGLIBT.EXS611.LOAD  
// DD DISP=SHR,DSN=SAGTEST.SMALOAD  
// DD DISP=SHR,DSN=SAGLIBT.SMALOAD  
// DD DISP=SHR,DSN=SAGLIBT.WAL712.LOAD  
//DDDRUCK DD SYSOUT=X  
//DDPRINT DD SYSOUT=X  
//MPMDUMP DD SYSOUT=X  
//SYSUDUMP DD SYSOUT=X  
//DDPRINT DD SYSOUT=X  
//DDCARD DD DISP=SHR,DSN=SAGLIBT.SMASRCE(EXSDDCAR)

EXSDDCAR member is as below

NODE=145  
SVC=249  
PRODUCT=EXS  
LOCAL=NO  
NABS=50  
NU=100  
NC=50  
TIMER=600  
LU=32768  
CT=120  
FORCE=NO

And we use Natural Security Logon Option = S

Altough we used all above definitions ,when we start Natural RPC server from TSO we get same message given before

M \*\*\* Server = SRV7  
M \*\*\* Node = ETB148  
M \*\*\* UserID = \*NSC  
M \*\*\* Natural RPC version: 5.1.1 - update level 0  
M \*\*\* Highest supported protocol version: 1130  
M EntireX Broker Stub Version=6.1.1, Patch Level=30, Highest API Supported=6  
M \*\*\* LOGON to Broker ETB148 failed.  
M 00200379 API: Inconsistent Security Installation

---

<div class="post-metadata">

**Author:** ![Douglas\_Kelly](https://sea1.discourse-cdn.com/techcommunity/user_avatar/techcommunity.softwareag.com/douglas_kelly/32/102_2.png) [@Douglas\_Kelly](https://techcommunity.softwareag.com/u/Douglas_Kelly)\
**Post date:** [March 22, 2005, 12:05am UTC](https://techcommunity.softwareag.com/t/natural-upgrade-to-3-1-6-natural-rpc-server-could-not-strt/59192/4 "2005-03-22T00:05:57Z")

</div>

Is SECUEXIT available in the STEPLIB of the Natural job, as the first load library in the concatenation? (starting an RPC server from TSO is not particularly recommended since it just ties up that TSO terminal session)

---

<div class="post-metadata">

**Author:** ![William\_Smith](https://avatars.discourse-cdn.com/v4/letter/w/bbce88/32.png) [@William\_Smith](https://techcommunity.softwareag.com/u/William_Smith)\
**Post date:** [March 22, 2005, 11:01am UTC](https://techcommunity.softwareag.com/t/natural-upgrade-to-3-1-6-natural-rpc-server-could-not-strt/59192/5 "2005-03-22T11:01:33Z")

</div>

Apply NAT316 and NSC316 PL16 as a start.  
This will upgrade your RPC version to:  
\*\*\* Natural RPC version: 5.1.1 update level 4  
\*\*\* Highest supported protocol version: 1130  
EntireX Broker Stub Version=7.1.1.60, Highest API Supported=7

Solved a number of issues for us.  
William

---

<div class="post-metadata">

**Author:** ![mustafa\_tavsiz](https://avatars.discourse-cdn.com/v4/letter/m/ecc23a/32.png) [@mustafa\_tavsiz](https://techcommunity.softwareag.com/u/mustafa_tavsiz)\
**Post date:** [March 22, 2005, 6:21pm UTC](https://techcommunity.softwareag.com/t/natural-upgrade-to-3-1-6-natural-rpc-server-could-not-strt/59192/6 "2005-03-22T18:21:43Z")

</div>

Adabas SVC version was wrong.Problem was solved after correction of SVS version and re-IPLed system.Classical test enviroment problem. :?

Thanks to all .  
Regards.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/techcommunity/original/3X/c/d/cd19967bb605d28a72d77eb83a1cae22f3df2eb8.svg) [@system](https://techcommunity.softwareag.com/u/system)\
**Post date:** [April 2, 2021, 2:39pm UTC](https://techcommunity.softwareag.com/t/natural-upgrade-to-3-1-6-natural-rpc-server-could-not-strt/59192/7 "2021-04-02T14:39:42Z")

</div>