# Parameters to MAINUSER **URL:** \ **Category:** Forum\ **Tags:** Adabas-Natural, Natural, Natural-Utilities\ **Created:** [September 22, 2015, 3:49pm UTC](https://techcommunity.softwareag.com/t/parameters-to-mainuser/183995 "2015-09-22T15:49:59Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Hein2](https://avatars.discourse-cdn.com/v4/letter/h/848f3c/32.png) [@Hein2](https://techcommunity.softwareag.com/u/Hein2)\ **Post date:** [September 22, 2015, 3:49pm UTC](https://techcommunity.softwareag.com/t/parameters-to-mainuser/183995/1 "2015-09-22T15:49:59Z")
To whom it may concern, I just want to know if I pass the parameters correctly to the subprogram MAINUSER, I want to do this programmatic. When I do it from Program MAINCALL manually it works. I’m not sure if I use the command parameters correctly. See my little test program: 000010 \*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\* 000020 \* SYSMAIN TEST PROGRAM UNSING MAINUSER SUBPROGRAM 000030 \*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\* 000040 DEFINE DATA LOCAL 000050 1 CMD (A250) 000060 1 SYSMAIN-Command (A250) 000070 END-DEFINE 000080 COMPRESS 000090 ‘C SA HEIN FM LIB NWK TO LIB SYSTEM REP’ 000100 INTO CMD 000110 SYSMAIN-Command := CMD 000120 CALLNAT ‘MAINUSER’ SYSMAIN-Command 000130 \*\*display SYSMAIN-Command 000140 END Error code: NAT0935 Conflicting number of parameters (Subprogram MAINUSER/SYSMAIN/22/10) VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV 0120 CALLNAT ‘MAINUSER’ SYSMAIN-Command I want to use it later from a WSDL, but want to test it first. Any suggestion will be appreciated Kind Regards ---
**Author:** ![system](https://global.discourse-cdn.com/techcommunity/original/3X/c/d/cd19967bb605d28a72d77eb83a1cae22f3df2eb8.svg) [@system](https://techcommunity.softwareag.com/u/system)\ **Post date:** [September 22, 2015, 4:00pm UTC](https://techcommunity.softwareag.com/t/parameters-to-mainuser/183995/2 "2015-09-22T16:00:17Z")
Use: CALLNAT ‘MAINUSER’ command error message library with: 1 command (A250) 1 error (N4) /\* return code issued by SYSMAIN 1 message (A72) /\* The message corresponding to the error 1 library (A8) /\* no meaning This should work. Kind Regards ---
**Author:** ![Hein2](https://avatars.discourse-cdn.com/v4/letter/h/848f3c/32.png) [@Hein2](https://techcommunity.softwareag.com/u/Hein2)\ **Post date:** [September 22, 2015, 4:42pm UTC](https://techcommunity.softwareag.com/t/parameters-to-mainuser/183995/3 "2015-09-22T16:42:29Z")
Steffen Thank you very much! It works! Mit freundlichen Grüßen / Kind regards 😃 ---
**Author:** ![system](https://global.discourse-cdn.com/techcommunity/original/3X/c/d/cd19967bb605d28a72d77eb83a1cae22f3df2eb8.svg) [@system](https://techcommunity.softwareag.com/u/system)\ **Post date:** [April 2, 2021, 3:34pm UTC](https://techcommunity.softwareag.com/t/parameters-to-mainuser/183995/4 "2021-04-02T15:34:16Z")