# SYSOBJH  calling OBJHAPI

**URL:** <https://techcommunity.softwareag.com/t/sysobjh-calling-objhapi/205368>\
**Category:** Forum\
**Tags:** Adabas-Natural, Natural, Natural-on-Linux\
**Created:** [August 30, 2019, 3:57pm UTC](https://techcommunity.softwareag.com/t/sysobjh-calling-objhapi/205368 "2019-08-30T15:57:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/techcommunity/original/3X/c/d/cd19967bb605d28a72d77eb83a1cae22f3df2eb8.svg) [@system](https://techcommunity.softwareag.com/u/system)\
**Post date:** [August 30, 2019, 3:57pm UTC](https://techcommunity.softwareag.com/t/sysobjh-calling-objhapi/205368/1 "2019-08-30T15:57:28Z")

</div>

Are there any experts on SYSOBJH out there and specifically constructing a direct command to invoke OBJHAPI with?  
I am struggling to make headway with the instructions in the manual.  
I need to unload from 1 to 16 programs with one CALL, wildcards etc are no use, I need to specify a list

UNLOAD program1,program2,program3,…program16 LIB SOURCLIB OBJTYPE N SCKIND S  
WHERE TRANSFER (I know this is not valid syntax but it is functionally what I am trying to achieve)

I cannot get the TYPE LIST option working.

Thanks,  
Giles

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/techcommunity/original/3X/c/d/cd19967bb605d28a72d77eb83a1cae22f3df2eb8.svg) [@system](https://techcommunity.softwareag.com/u/system)\
**Post date:** [September 5, 2019, 4:53pm UTC](https://techcommunity.softwareag.com/t/sysobjh-calling-objhapi/205368/2 "2019-09-05T16:53:04Z")

</div>

Admins, you can delete this thread.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/techcommunity/original/3X/c/d/cd19967bb605d28a72d77eb83a1cae22f3df2eb8.svg) [@system](https://techcommunity.softwareag.com/u/system)\
**Post date:** [April 2, 2021, 3:43pm UTC](https://techcommunity.softwareag.com/t/sysobjh-calling-objhapi/205368/3 "2021-04-02T15:43:27Z")

</div>