# Tools/map/environment does not show

**URL:** <https://techcommunity.softwareag.com/t/tools-map-environment-does-not-show/96307>\
**Category:** Forum\
**Tags:** Adabas-Natural, Natural, Natural-Single-Point-of-Development-SPoD\
**Created:** [February 24, 2011, 2:42pm UTC](https://techcommunity.softwareag.com/t/tools-map-environment-does-not-show/96307 "2011-02-24T14:42:09Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jan\_Wisse](https://avatars.discourse-cdn.com/v4/letter/j/45deac/32.png) [@Jan\_Wisse](https://techcommunity.softwareag.com/u/Jan_Wisse)\
**Post date:** [February 24, 2011, 2:42pm UTC](https://techcommunity.softwareag.com/t/tools-map-environment-does-not-show/96307/1 "2011-02-24T14:42:09Z")

</div>

Hi,  
I just started at this site and SPOD (Natural Studio 6.3.9) was installed for me. Now trying to map the mainframe environment, the menu entries tools/map/environment and tools/map/application are both grayed out.  
Nobody here remembers what to do about it although they remember it happened before. I compared all ini and cfg files and can’t see anything wrong with them.  
I do have a workaround: a little program stacking the MAP command but I should not need that.  
Does anyone know what to do about the grayed items?

Thanks

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/techcommunity/original/3X/c/d/cd19967bb605d28a72d77eb83a1cae22f3df2eb8.svg) [@system](https://techcommunity.softwareag.com/u/system)\
**Post date:** [February 24, 2011, 4:30pm UTC](https://techcommunity.softwareag.com/t/tools-map-environment-does-not-show/96307/2 "2011-02-24T16:30:42Z")

</div>

Hi Jan,

When Natural Studio was installed, was the check box for "Natural Development Client (SPoD) marked?

Best regards,

---

<div class="post-metadata">

**Author:** ![Jan\_Wisse](https://avatars.discourse-cdn.com/v4/letter/j/45deac/32.png) [@Jan\_Wisse](https://techcommunity.softwareag.com/u/Jan_Wisse)\
**Post date:** [February 24, 2011, 6:03pm UTC](https://techcommunity.softwareag.com/t/tools-map-environment-does-not-show/96307/3 "2011-02-24T18:03:20Z")

</div>

Hi Mogens,

don’t have a clue if that was marked, but your remark caused me to check the installation log, and I found:

```auto
13:45:42 AskSetupType Incoming Setup type: Compact
13:45:44 ItsNatural --> BEGIN -->
13:45:44 ItsNatural Natural
13:45:44 ItsNatural <--- END <---
13:45:44 AskSetupType Compact
13:45:44 AskSetupType <--- END <---
```

and

```auto
13:47:07 WriteFeatures Feature 'Mainframe Navigation' unselected
```

This looks suspicious enough, so I am going to ask to reinstall everything, and I will look over his shoulder to see what is done.

Thanks!  
Jan

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/techcommunity/original/3X/c/d/cd19967bb605d28a72d77eb83a1cae22f3df2eb8.svg) [@system](https://techcommunity.softwareag.com/u/system)\
**Post date:** [February 24, 2011, 7:46pm UTC](https://techcommunity.softwareag.com/t/tools-map-environment-does-not-show/96307/4 "2011-02-24T19:46:49Z")

</div>

Hi Jan,

You can also run the installation (setup.exe) over the current installation and select modify. Here you can select ‘SPoD’.

Best regards,

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/techcommunity/original/3X/c/d/cd19967bb605d28a72d77eb83a1cae22f3df2eb8.svg) [@system](https://techcommunity.softwareag.com/u/system)\
**Post date:** [April 2, 2021, 2:59pm UTC](https://techcommunity.softwareag.com/t/tools-map-environment-does-not-show/96307/5 "2021-04-02T14:59:50Z")

</div>