# xbd.error.xxxx properties for XSL Transformer **URL:** \ **Category:** Forum\ **Tags:** Former-Crossvision-Products, Service-Orchestrator\ **Created:** [November 30, 2004, 9:24am UTC](https://techcommunity.softwareag.com/t/xbd-error-xxxx-properties-for-xsl-transformer/58687 "2004-11-30T09:24:39Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Mikhail\_Anossovitch](https://avatars.discourse-cdn.com/v4/letter/m/ee59a6/32.png) [@Mikhail\_Anossovitch](https://techcommunity.softwareag.com/u/Mikhail_Anossovitch)\ **Post date:** [November 30, 2004, 9:24am UTC](https://techcommunity.softwareag.com/t/xbd-error-xxxx-properties-for-xsl-transformer/58687/1 "2004-11-30T09:24:39Z")
I?ve written an error handling sequence which relies on xbd.error.text and xbd.error.line Mediator properties. The SOAP gateway sets these properties fine, but XSL transformer doesn?t. I specified wrong file name to test it and ?file not found? error could be seen in the log, but the xbd.error properties were missing. Is this a bug in ver. 7.3 or I am missing something? Regards Mikhail ---
**Author:** ![Matthew](https://avatars.discourse-cdn.com/v4/letter/m/ed655f/32.png) [@Matthew](https://techcommunity.softwareag.com/u/Matthew)\ **Post date:** [November 30, 2004, 4:34pm UTC](https://techcommunity.softwareag.com/t/xbd-error-xxxx-properties-for-xsl-transformer/58687/2 "2004-11-30T16:34:44Z")
Hello Mikhail, The xbd.error properties are set during on\_error processing. In effect, your current sequence processing will stop and the sequencer will search the current step as well as the preceeding processing tree for references to an on\_error sequence. If there are no on\_error sequences defined in the higher level nodes then the properties will never be set. I tested this in my installation and found no abnormalities in the processing of the properties. Could you publish the sequence you are testing? Regards, πŸ†’ - Matthew G. ---
**Author:** ![Mikhail\_Anossovitch](https://avatars.discourse-cdn.com/v4/letter/m/ee59a6/32.png) [@Mikhail\_Anossovitch](https://techcommunity.softwareag.com/u/Mikhail_Anossovitch)\ **Post date:** [December 1, 2004, 5:21am UTC](https://techcommunity.softwareag.com/t/xbd-error-xxxx-properties-for-xsl-transformer/58687/3 "2004-12-01T05:21:02Z")
Hi Mathew, I understand exactly what you suggested. I use on\_error processing for the whole sequence, i.e. SOAP gateway and XSL transformer should be covered by the same on\_error sequence as these elements don?t have an individual on\_error specified. The SOAP Gateway sets the properties OK, but XSL Transformer doesn?t. I attached two files ? sequence itself and error sequence. Mikhail [FIX306N.xml](https://techcommunity.softwareag.com/uploads/short-url/gng9jYeF1jivR6tAo4dL1KbO9Ko.xml) (1.27 KB) ---
**Author:** ![Mikhail\_Anossovitch](https://avatars.discourse-cdn.com/v4/letter/m/ee59a6/32.png) [@Mikhail\_Anossovitch](https://techcommunity.softwareag.com/u/Mikhail_Anossovitch)\ **Post date:** [December 1, 2004, 5:22am UTC](https://techcommunity.softwareag.com/t/xbd-error-xxxx-properties-for-xsl-transformer/58687/4 "2004-12-01T05:22:58Z")
Here is the second file [FIX306N\_Error.xml](https://techcommunity.softwareag.com/uploads/short-url/zQR0TypJsSkCCH86dQYOKgutugo.xml) (1.11 KB) ---
**Author:** ![Matthew](https://avatars.discourse-cdn.com/v4/letter/m/ed655f/32.png) [@Matthew](https://techcommunity.softwareag.com/u/Matthew)\ **Post date:** [December 1, 2004, 6:05pm UTC](https://techcommunity.softwareag.com/t/xbd-error-xxxx-properties-for-xsl-transformer/58687/5 "2004-12-01T18:05:13Z")
Hello Mikhail, Your sequences look clean, at least I don’t see any major problem with them. I do have one concern that I will have to test in my environment before I come to and final conclusion. It would help if you could post a log made at debug level. I am mainly interested in whether the on\_error logic is able to find the on\_error sequence at its relative location after an error occurs in the Transformer. Thanks & Regards, - Matthew G. ---
**Author:** ![Mikhail\_Anossovitch](https://avatars.discourse-cdn.com/v4/letter/m/ee59a6/32.png) [@Mikhail\_Anossovitch](https://techcommunity.softwareag.com/u/Mikhail_Anossovitch)\ **Post date:** [December 2, 2004, 4:11am UTC](https://techcommunity.softwareag.com/t/xbd-error-xxxx-properties-for-xsl-transformer/58687/6 "2004-12-02T04:11:57Z")
Hi Matthew, The on\_error sequence is definitely found as it executes the alternative route (i.e. when xbd.error.text is not set I set the error to β€œ0001”). Here is the log attached. [DEV.xbd.log](https://techcommunity.softwareag.com/uploads/short-url/lAx9bv416GGYh0QssQerKYXUOE2.log) (173 KB) ---
**Author:** ![system](https://global.discourse-cdn.com/techcommunity/original/3X/c/d/cd19967bb605d28a72d77eb83a1cae22f3df2eb8.svg) [@system](https://techcommunity.softwareag.com/u/system)\ **Post date:** [April 2, 2021, 2:39pm UTC](https://techcommunity.softwareag.com/t/xbd-error-xxxx-properties-for-xsl-transformer/58687/7 "2021-04-02T14:39:24Z")